Preparation of an amphoteric lignin copolymer and its value in the papermaking industry

Abstract

Lignin biomass is an important renewable woody material that can be converted into high value-added products through physical and chemical reactions, such as paper strength additives. In this study, a cationic methacryloyloxyethyl trimethylammonium chloride monomer (DMC) and anionic acrylic monomer (AA) were grafted onto softwood kraft lignin through free radical polymerization to prepare an amphoteric lignin copolymer. Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (1H NMR), elemental analysis, and charge density analysis methods confirmed that the anionic and cationic monomers were successfully grafted onto the lignin. The grafting ratios of AA and DMC monomer in the lignin-DMC-AA copolymer were 62.4% and 51.3%, respectively. The application of lignin-DMC-AA copolymer as a paper additive for enhancing the physical properties of paper sheets was studied in the papermaking industry. The results indicated that the copolymer had a maximum increase in physical strength at around 2 wt% lignin-DMC-AA. The amount absorbed on the fibers was 18.5 mg/g, and the retention of the lignin-DMC-AA copolymer was over 90%.