Wood dust granular analysis in the sanding process of thermally modified wood versus its density

Abstract

This paper aimed to define the density fluctuations of thermally modified wood. This was achieved by the granular analysis of wood dust. The wood dust was acquired by sanding completed using a narrow belt sander. The samples were taken from spruce, oak, and meranti wood types that were thermally modified at temperatures of 160 °C, 180 °C, 200 °C, and 220 °C. The results showed the shares of ≤ 0.08 mm wood dust particles and how their share was related to the temperature treatment; residue curves manifested the wood dust stratification in individual sieves and their density. The shares and densities of the wood dust were statistically analysed, and the statistical significance of the analysed values was calculated. An increased temperature decreased the wood density and decreased the share of the ≤ 0.08 mm wood dust particles. The wood dust shares in the 0.032-mm sieve and at the bottom (the finest particles) of the sieving machine also decreased; however, the share increased in the 0.125-mm sieve.