Calibration and Experimental Validation of Contact Parameters for Oat Seeds for Discrete Element Method Simulations

Abstract

Highlights The static friction coefficient and rolling friction coefficient of oat seeds were calibrated by the discrete element method. Two representative oat varieties were selected. The hollow cylinder method and sidewall collapse method were used together to reduce the test error. Abstract . Hulless and shelled oat are two types of oat with major differences in physical appearance. To study the contact parameters between the two different oat seed types, these parameters were delineated with the discrete element method and graphic image processing technology. Using plexiglass as the contact material, the experiments used two different angle of repose measurement methods—hollow cylinder and collapse sidewall devices, to perform bench and simulation experiments on the two different oats. Under different measurement methods, bench experiments measured the angles of repose of the two oat seed types at 33.19°, 33.82° and 22.45°, 23.57°; the static friction coefficient and rolling friction coefficient were the experimental factors, and the angle of repose was the experimental indicator in the simulation. The steepest climbing experiment determined the optimal range of the experimental factor, and the regression equation between the static friction coefficient, rolling friction coefficient and angle of repose was established by a quadratic orthogonal rotation combination experiment. Finally, the angles of repose measured by the bench experiment with the two different measurement methods were treated as target values, the coefficient of static friction and the coefficient of rolling friction were solved; the coefficient of static friction between hulless oats was 0.36, and the coefficient of rolling friction between hulless oats was 0.052; the coefficient of static friction between shelled oats was 0.24, and the coefficient of rolling friction between shelled oats was 0.036. The obtained contact parameters between seeds were input into EDEM, the simulation and bench experiment results were verified. The difference between the simulation results and the actual values was within 3%. The angle of repose of oats after calibration was close to the actual situation, and the calibration results had high reliability and provided a referencefor the measurement of contact parameters between other agricultural crop seeds. Keywords: Calibration, Contact parameters, Discrete element method, Oat.