Modeling Evapotranspiration and Crop Growth of Irrigated and Non-Irrigated Corn in the Texas High Plains Using RZWQM

Abstract

Abstract. Accurate quantification and management of crop evapotranspiration (ET) are critical to optimizing crop water productivity for both dryland and irrigated agriculture, especially in the semiarid regions of the world. In this study, four weighing lysimeters in Bushland, Texas, were planted to maize in 1994 with two fully irrigated and two non-irrigated for measuring crop ET. The Root Zone Water Quality Model (RZWQM2) was used to evaluate soil water balance and crop production with potential evapotranspiration (PET) estimated from either the Shuttleworth-Wallace method (PTSW) or the ASCE standardized alfalfa reference ET multiplied by crop coefficients (PTASCE). As a result, two water stress factors were defined from actual transpiration (AT) and were tested in the model against the lysimeter data, i.e., AT/PTSW and AT/PTASCE. For both water stress factors, the simulated daily ET values were reasonably close to the measured values, with underestimated ET during mid-growing stage in both non-irrigated lysimeters. Root mean squared deviations (RMSDs) and relative RMSDs (RMSD/observed mean) values for leaf area index, biomass, soil water content, and daily ET were within simulation errors reported earlier in the literature. For example, the RMSDs of simulated daily ET were less than 1.52 mm for all irrigated and non-irrigated lysimeters. Overall, ET was simulated within 3% of the measured data for both fully irrigated lysimeters and undersimulated by less than 11% using both stress factors for the non-irrigated lysimeters. Our results suggest that both methods are promising for simulating crop production and ET under irrigated conditions, but the methods need to be improved for dryland and non-irrigated conditions. Keywords: ET, RZWQM modeling, Stress factor, Weighing lysimeter.