EFFECT OF PRINTING SPEED ON FDM 3D-PRINTED PLA SAMPLES PRODUCED USING DIFFERENT TWO PRINTERS
-
Published:2022-09-03
Issue:
Volume:
Page:
-
ISSN:2602-3350
-
Container-title:International Journal of 3D Printing Technologies and Digital Industry
-
language:tr
-
Short-container-title:IJ3DPTDI
Author:
KAMER Muhammed Safa1ORCID, TEMİZ Şemsettin2ORCID, YAYKAŞLI Hakan3ORCID, KAYA Ahmet4ORCID, AKAY Orhan4
Affiliation:
1. KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ, MÜHENDİSLİK-MİMARLIK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ 2. INONU UNIVERSITY, FACULTY OF ENGINEERING 3. KAHRAMANMARAS ISTIKLAL UNIVERSITY, ELBİSTAN VOCATIONAL SCHOOL 4. KAHRAMANMARAS SUTCU IMAM UNIVERSITY, FACULTY OF ENGINEERING-ARCHITECTURE
Abstract
In this study, tensile test samples were produced using Polylactic Acid material at seven different printing speeds with different two 3D printers without using bed heating. The effect of printing speed on mechanical properties was investigated. The mass, hardness, surface roughness and porosity values of the produced samples were determined. A tensile test was applied to the produced samples. After the tensile test, scanning electron microscope images of the fractured samples were taken from the fracturing regions. The mechanical properties of the samples produced in the same operating parameters on both 3D printers were examined comparatively. As a result, it was determined which printer model used in 3D printing has a significant effect on the mechanical properties of the produced product.
Publisher
International Journal of 3D Printing Technologies and Digital Industry
Subject
Marketing,Economics and Econometrics,General Materials Science,General Chemical Engineering
Reference36 articles.
1. Ngo, T.D., Kashani, A., Imbalzano, G., Nguyen, K.T.Q., Hui, D., “Additive manufacturing (3D printing): A review of materials, methods, applications and challenges”, Composite Part B: Engineering, Vol. 143, Pages 172-196, 2018. 2. Popescu, D., Zapciu, A., Amza, C., Baciu, F., Marinescu, R., “FDM process parameters influence over the mechanical properties of polymer specimens: A review”, Polymer Testing, Vol.69, Pages 157-166, 2018. 3. Yaman, U., Butt, N., Sacks, E., Hoffmann C., “Slice coherence in a query-based architecture for 3D heterogeneous printing”, Computer-Aided Design, Vol. 75-76, Pages 27-38, 2016. 4. Beran, T., Mulholland, T., Henning, F., Rudolph, N., Osswald, T.A., “Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers”, Additive Manufacturing, Vol. 23, Pages 206-214, 2018. 5. Osswald, T.A., Puentes, J., Kattinger, J., “Fused filament fabrication melting model”, Additive Manufacturing, Vol. 22, Pages 51-59, 2018.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献
|
|