Estimation of Dimensional Deviation of Parts Printed in Different Orientations on Multi Jet Printer-Reference-Cited by-同舟云学术

Estimation of Dimensional Deviation of Parts Printed in Different Orientations on Multi Jet Printer

Published:2024-03-01 Issue:1 Volume:3 Page:46-59
ISSN:2583-5114
Container-title:Prabha Materials Science Letters
language:en
Short-container-title:

Author:

Chand Ramesh¹,Gupta M. K.²

Affiliation:

1. Department of Industrial and Production Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, Punjab, India.

2. Department of Mechanical Engineering, Opole University of Technology, Opole, Poland.

Abstract

The study was primarily concerned with the dimensional deviation for the part produced in the various alignments A, B, C, & D and selecting the orientation or alignments through the least dimensional deviation. In this work, the part is lying on the base (A), the long edge (B), and the short edge (C), and the part is inclined at 45 degrees (D) to the surface of the base plate. Created the components in a variety of orientations using a multi-jet printer. Further, using experimental data (change in length, width, height and diameter), the model has been developed with a regression-based imperial connection to predict the behavior of MultiJet-three-dimensional (MJP-3D) printed components in various orientations. Because the goal was to anticipate the optimum orientation, the Graph Theory and Matrix Approach Method (GTMA) were utilized towards discover the best orientation. In contrast to other orientations, orientation C is determined to be the optimum manufacturing orientation with the least dimensional variation.

Publisher

Ram Arti Publishers

Reference27 articles.

1. Aktürk, M., Boy, M., Gupta, M.K., Waqar, S., Krolczyk, G.M., & Korkmaz, M.E. (2021). Numerical and experimental investigations of built orientation dependent Johnson–Cook model for selective laser melting manufactured AlSi10Mg. Journal of Materials Research and Technology, 15, 6244-6259.

2. Anand, M.B., & Vinodh, S. (2018). Application of fuzzy AHP–TOPSIS for ranking additive manufacturing processes for microfabrication. Rapid Prototyping Journal, 24(2), 424-435. https://doi.org/10.1108/RPJ-10-2016-0160.

3. Arısoy, Y.M., Criales, L.E., Özel, T., Lane, B., Moylan, S., & Donmez, A. (2017). Influence of scan strategy and process parameters on microstructure and its optimization in additively manufactured nickel alloy 625 via laser powder bed fusion. The International Journal of Advanced Manufacturing Technology, 90, 1393-1417. https://doi.org/10.1007/s00170-016-9429-z.

4. Bogojević, N., Ćirić-Kostić, S., Vranić, A., Olmi, G., Croccolo, D. (2020). Influence of the Orientation of Steel Parts Produced by DMLS on the Fatigue Behaviour. In: Wang, L., Majstorovic, V., Mourtzis, D., Carpanzano, E., Moroni, G., Galantucci, L. (eds) Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-46212-3_22.

5. Chadha, A., Ul Haq, M.I., Raina, A., Singh, R.R., Penumarti, N.B., & Bishnoi, M.S. (2019). Effect of fused deposition modelling process parameters on mechanical properties of 3D printed parts. World Journal of Engineering, 16(4), 550-559.