The effect of the heat-treatment regime on the properties of reactive powder concrete

Abstract

The influence of the curing regime on the mechanical properties and microstructure of ultra-high-strength mortar was studied. Nine different curing procedures were applied in which the start and duration of the heat treatment were varied. The studied mortars had a water-to-binder ratio of 0.17 and additions of amorphous silica fume and fine quartz filler. The microstructure and microchemistry were investigated by electron scanning microscopy and mercury intrusion porosimetry. The results revealed that longer heating times increased the degree of hydration, refined the microstructure and resulted in higher ultimate compressive strength. Very late and very early application of the heat treatment caused a lower degree of hydration and a smaller long-term increase of compressive strength. The scanning electron microscopy investigation revealed the formation of one hydration rim around anhydrous cement particles and the presence of a hollow shell in all investigated specimens.