Flexural strengthening of RC beams with built-in basalt-fibre-reinforced polymer T-plates

Abstract

Basalt-fibre-reinforced polymers (BFRPs) are expected to be excellent materials for the repair and rehabilitation of civil infrastructure due to their sound mechanical properties, high corrosion resistance and low cost. However, reported studies investigating reinforced concrete (RC) beams externally strengthened with BFRP are limited. The objective of this work was thus to determine the effect of BFRP strengthening on the flexural performance of RC beams. Four RC beams with a rectangular cross-section were fabricated, strengthened using different BFRP reinforcement techniques and tested under four-point bending until failure. The failure mode, crack widths, number of cracks, load–deflection response curves and ductility of the beam systems were recorded and analysed. The experimental results showed that, compared with a control beam, the stiffness and ultimate capacity of the strengthened beams were increased by 8–23% and 14–30%, respectively. To predict the load-carrying capacity and deflection of the test specimens, three-dimensional finite-element (FE) modelling was performed using Abaqus software to simulate the behaviour of RC beams strengthened with BFRP plates. The predictions of the FE model matched the experimental results well in terms of the mid-span deflection and load-carrying capacity.