A novel method for deterioration assessment in concrete using colorimetry analysis-Reference-Cited by-同舟云学术

A novel method for deterioration assessment in concrete using colorimetry analysis

Published:2022-12 Issue:24 Volume:74 Page:1243-1258
ISSN:0024-9831
Container-title:Magazine of Concrete Research
language:en
Short-container-title:Magazine of Concrete Research

Author:

Banerjee Anish¹^ORCID,Guru Prathap Reddy V.²,Pancharathi Rathish Kumar³,Tadepalli Tezeswi⁴

Affiliation:

1. Postgraduate Scholar, Department of Civil Engineering, National Institute of Technology Warangal, Warangal, Telangana, India (corresponding author: )

2. Research Scholar, Department of Civil Engineering, National Institute of Technology Warangal, Warangal, Telangana, India

3. Professor, Department of Civil Engineering, National Institute of Technology Warangal, Warangal, Telangana, India

4. Assistant Professor, Department of Civil Engineering, National Institute of Technology Warangal, Warangal, Telangana, India

Abstract

Image-based deterioration analysis deals with estimating the correlation between the extent of deterioration in terms of changes in colour profiles of deteriorated surfaces with changes in the residual strength and durability. Analysis was performed on images of cubes of concrete immersed in acid, chloride and sulphate at 5% concentration for a period of 3, 7, 14 and 28 days. The colour profiles of deteriorated surfaces are analysed in CIE-XYZ colour space, and the respective chromaticity diagrams are investigated. The nature of change in the colour profile for respective immersion was investigated, attaining to the sample's absorption rate of the reagent, reagent concentration that was required to initiate chemical reactions and their respective reactivity rates. This study thus enables image-based identification of damage, analytical and non-subjective evaluation of the extent of deterioration and provides an insight into the interrelationship between the extent of deterioration and the performance in terms of strength and durability.

Publisher

Thomas Telford Ltd.

Subject

General Materials Science,Building and Construction,Civil and Structural Engineering

Link

https://www.icevirtuallibrary.com/doi/pdf/10.1680/jmacr.21.00071

Reference31 articles.

1. ASTM (2003) C666/C666M: Standard test method for resistance of concrete to rapid freezing and thawing. ASTM International, West Conshohocken, PA, USA.

2. Assessment of the durability of concrete from its permeation properties: a review

3. BIS (2012) 10500: Indian standards:10500-1991, drinking water specifications. bureau of indian standards, New Delhi, India.

4. BIS (2013) 12269: Indian standards:12269-2013, specifications for 53 grade ordinary portland cement. Bureau of Indian Standards, New Delhi, India.

5. BIS (2016a) 2386-4: Indian standards: 2386-4:1963 (reaffirmed 2016), method of test for aggregates for concrete-mechanical properties. Bureau of Indian Standards, New Delhi, India.