Ageing of HDPE geomembranes in jet fuel A-1

Author:

Rimal S.1,Rowe R.K.2

Affiliation:

1. Landfill design engineer, Golder Associates, 2390 Argentia Road, Mississauga, Ontario, Canada L5N 5Z7, Telephone: +1 905 557 4444, Telefax: +1 905 567 6561, E-mail: Santosh_Rimal@golder.com

2. Professor, GeoEngineering Centre at Queen's-RMC, Queen's University, Kingston, Ontario, Canada, K7L 3N6, Telephone: +1 613 533 6933, Telefax: +1 613 533 6934, E-mail: kerry@civil.queensu.ca

Abstract

ABSTRACT: The latest findings regarding the ageing of high-density polyethylene (HDPE) geomembrane (GM) exposed to jet fuel are presented. Data from std-OIT and HP-OIT tests both indicate that some component(s) of the antioxidant package are readily leached into the jet fuel but once this component is removed the OIT values remain relatively stable for up to at least 4 years. The std-OIT depletion rates for the readily leachable component of the antioxidant package are estimated from the available data. Based on the jet fuel immersion test at 23°C the depletion time to reach the residual standard oxidative induction time (OIT) is 1.6 years for 1.5 mm thick conventional GM and 5.5 years for the 1.5 mm fluorinated GM. Thus fluorination had a significantly beneficial effect in terms of slowing antioxidant depletion. Arrhenius modelling based on data at three temperatures (23, 9 and −22°C) is used to predict std-OIT depletion times at a temperature (−1°C) applicable to containment of jet fuel spill at Brevoort Island in the Arctic. The estimated depletion time ranged from 14–24 years for 1.5 mm thick untreated GM, 22–33 years for 2 mm untreated GM, and 26–33 years for 1.5 mm fluorinated GM. For GMs with a similar composition, the OIT depletion rate decreased approximately with the square of GM thickness. At 23°C the depletion rate in the diffusion test was only about one-quarter of that in an immersion test. Tensile elongation at yield increased with time of immersion in jet fuel. Tensile yield properties and initial tear resistance of the GM were lower when the GM was wet with jet fuel than when dry. However, no significant change in dry initial tear resistance was observed. No significant change in crystallinity was observed in GM exposed to jet fuel. The immersion data suggest that the 1.5 mm f-HDPE GM liner used to containing the hydrocarbon spill on Brevoort Island is likely to perform well for a period well in excess of 25 years at the average field temperature (−1°C). Based on the findings from the diffusion tests with jet fuel on one side and water on the other (i.e. similar exposure conditions to that in the field), the time to antioxidant depletion is likely to about four times longer than when immersed in jet fuel and so the depletion time in the field under these conditions is projected to be in excess of 100 years. These tests will need to be run for a much longer period of time to allow a better estimate to be made of the depletion rate of remaining antioxidants and service life of GM exposed to jet fuel.

Publisher

Thomas Telford Ltd.

Subject

Geotechnical Engineering and Engineering Geology,Civil and Structural Engineering

Reference51 articles.

Cited by 7 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3