Enhancement of geopolymerisation reactivity and thermal resistance using mixed types of fly ash

Abstract

Geopolymers prepared with class C fly ash (FA) often suffer from a flash geopolymerisation rate, making it difficult to work. Class F FA, however, may have low reactivity, so an admixture must be added to solve this problem. This research highlighted the use of mixed class C and class F FA as a precursor for geopolymer preparation to alleviate such problems. Optimisation of the precursor recipe and the solid-to-liquid ratio (S/L) was assessed. The highest compressive strength (30.54 MPa) and a suitable initial (136 min) and final (240 min) setting times were obtained with S/L = 2.00, and 50 : 50 proportions of class C to class F FA. The fire resistance test on a 10 mm thick geopolymer panel at 1000°C for 180 min showed a maximum temperature of ∼570–580°C on the reverse side without catastrophic failure, suggesting it can be applied for use in fire retardation.