Design of bolted side-plated reinforced-concrete beams with partial interaction

Abstract

Existing reinforced-concrete (RC) beams can be effectively strengthened by anchoring steel plates to the side faces of the beams using bolts, which is known as the bolted side-plating (BSP) technique. Previous studies have found that the performance of BSP beams is primarily controlled by the degree of partial interaction at the steel–RC interface, which can be conveniently quantified by the strain and curvature factors. In this paper, a new simplified flexural design procedure for BSP beams taking into account partial interaction is presented. Some optimum ranges of strain and curvature factors are first introduced to the flexural design of BSP beams. By ensuring the flexural capacity of a BSP beam is higher than the design moment, the preliminary size of steel plates and the arrangement of bolts can be determined. Following this, the maximum design slips and minimum design strain and curvature factors are calculated and back-checked to ensure the target flexural capacity of the BSP beam has been achieved. An example is presented to illustrate the effectiveness of the optimised design method for BSP beams, considering the effect of partial interaction under realistic loading conditions.