Numerical assessment of the effects of end-restraints and a pre-existing fissure on the interpretation of triaxial tests on stiff clays

Abstract

Conventional laboratory triaxial tests apply axisymmetric boundary conditions to a cylindrical sample which has an axisymmetric geometry. For a homogeneous sample this implies that the deformed shape of the sample should maintain an axisymmetric geometry during the test. Consequently, the sample should deform in a barrelling mode and if slip planes develop they should define a cup and cone-like failure surface. However, in many triaxial tests such behaviour is not observed, especially as failure is approached when a planar slip surface develops. Such a deformation mode is not axisymmetric. One reason for this behaviour is that a fissure pre-exists in the sample. Employing hydro-mechanically coupled three-dimensional finite-element analyses, this paper investigates the influence of a single fissure in a triaxial sample of stiff clay on its behaviour throughout the test, focusing on the fissure position, orientation, strength and stiffness, in conjunction with the sample's end-restraints (rough or smooth). The effects are quantified in terms of the sample's overall stiffness and strength, indicating that the presence of a fissure can affect the very small strain stiffness, and that it has a significant effect on the strength of the sample, demonstrating that the conventional methods used to interpret laboratory tests may give unconservative results. The results also show a significant effect of the conditions at the top and bottom surfaces of the sample, where in particular the lateral restraint and rough ends introduce ‘bending’ in the sample.