Cellular ceramic architectures produced by hybrid additive manufacturing: a review on the evolution of their design-Reference-Cited by-同舟云学术

Cellular ceramic architectures produced by hybrid additive manufacturing: a review on the evolution of their design

Published:2020-09-01 Issue:9 Volume:128 Page:595-604
ISSN:1348-6535
Container-title:Journal of the Ceramic Society of Japan
language:en
Short-container-title:J. Ceram. Soc. Japan

Author:

PELANCONI Marco¹²,REZAEI Ehsan¹,ORTONA Alberto¹

Affiliation:

1. University of Applied Sciences (SUPSI): Mechanical Engineering and Materials Technology Institute (MEMTi)

2. Department of Industrial Engineering, University of Padova

Publisher

Ceramic Society of Japan

Subject

Materials Chemistry,Condensed Matter Physics,General Chemistry,Ceramics and Composites

Link

https://www.jstage.jst.go.jp/article/jcersj2/128/9/128_20071/_pdf

Reference67 articles.

1. 1) G. Mayer and M. Sarikaya, Exp. Mech., 42, 395–403 (2002).

2. 2) L. J. Gibson and M. F. Ashby, “Cellular solids: structure and properties”, Cambridge university press (1999).

3. 3) T. Fend, Opt. Appl., 40, 271–284 (2010).

4. 4) S. Gianella, D. Gaia and A. Ortona, Adv. Eng. Mater., 14, 1074–1081 (2012).

5. 5) Y. S. Montenegro Camacho, S. Bensaid, S. Lorentzou, N. Vlachos, G. Pantoleontos, A. Konstandopoulos, M. Luneau, F. C. Meunier, N. Guilhaume, Y. Schuurman, E. Werzner, A. Herrmann, F. Rau, H. Krause, E. Rezaei, A. Ortona, S. Gianella, A. Khinsky, M. Antonini, L. Marchisio, F. Vilardo, D. Trimis and D. Fino, E. Werzner, Int. J., 43, 161–177 (2018).

Cited by 31 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Open-cell ceramic foam filters for melt filtration: Processing, characterization, improvement and application;Journal of Materials Research and Technology;2024-09

2. High‐strength Si–SiC lattices prepared by powder bed fusion, infiltration‐pyrolysis, and reactive silicon infiltration;Journal of the American Ceramic Society;2024-02-21

3. Mechanical predictive modeling of stereolithographic additive manufactured alumina microlattices;International Journal of Mechanical Sciences;2024-01

4. Dynamic modeling, simulation and optimization of the partially-autothermal reforming of biogas in coated monolith channels;Chemical Engineering Journal Advances;2023-11

5. Powder bed fusion of polyamide powders combined with different preceramic polymers infiltration and pyrolysis to produce complex-shaped ceramics;Journal of the European Ceramic Society;2023-11