The Novel Surgical Technique in the Cyanoacrylate Closure for Incompetent Great Saphenous Veins

Abstract

Objective The current Instructions for Use (IFU) of cyanoacrylate closure (CAC) is to start initial injection with the catheter tip positioned 5 cm distal to the sapheno-femoral junction (SFJ) to prevent endovenous glue-induced thrombosis (EGIT). However, this defensive design is responsible for the relatively long stump length. Although clinical studies on the long-term recurrence rate are still lacking, the long stump length can predict a higher long-term recurrence rate compared to other surgical methods. The author developed a novel surgical technique that can overcome the weakness of CAC, and the initial outcomes of this technique are described in this article. Methods This study retrospectively reviewed 25 great saphenous vein (GSV) in 20 patients who underwent CAC for incompetent GSV at our hospital. The procedure from puncturing the GSV to insertion of the catheter is the same as the conventional method. Place the catheter tip 2-3 cm below the SFJ before cyanoacrylate injection. After confirming the position of the SFJ with the longitudinal view of the ultrasound, press the GSV directly above the SFJ transversely with the second to fifth fingertips of the left hand. Then, the ultrasound probe is placed against the distal part of the fingertips, and CA injection is performed while GSV is monitored in real time. Results The mean stump length immediately after surgery was 19.3 (± 7.8) mm, with a range of .0-38.4 mm. The mean stump length after 1 week was 12.3 (± 7.4) mm and the range was .1-35.4 mm. The mean stump length after 1 month was 15.4 (± 10.1) mm, and the range was .0-35.4 mm. There was no case with EGIT or recanalization. Conclusions The author confirmed the possibility of safely reducing stump length with this novel surgical technique, and expect that this method can help overcome the weakness of CAC.