Dynamic simulation of the relationship between pressure and displacement for the waist of elastic pantyhose in the walking process using the finite element method

Abstract

The inward displacement perpendicular to body surface produced by external pressure is an important index to evaluate pressure comfort and optimal design of tight clothing products. Because of the limited pressure exerted on the human body after wearing compression clothing, the corresponding displacement is generally small, and it is difficult to obtain an accurate displacement value of the human body using general methods. In this paper, we focused on the functional relationship between pressure and displacement when the human body was in the walking state after dressing in elastic pantyhose, and then the displacement data could be easily obtained using this method. Through computerized tomography scanning, establishing of the waist cross-section, finite element simulation, and curve fitting, we finally obtained the functional relationship between the pressure/displacement ratio and angle when the body is dressed in four sample elastic pantyhose during the walking process in this study. In the formula, pressure data can be easily obtained through the pressure experiment, and the corresponding displacement value at any point of the human body can be calculated using the quadratic fitting curve equation. Results indicated that no matter what state the human body was in (static or dynamic) after wearing elastic pantyhose, the relationship between pressure and displacement at the corresponding point remains basically unchanged. That is to say, the relationship between pressure and displacement was basically not affected by the state of the human body when dressed in a tight garment. The conclusions provide an important reference for evaluating pressure comfort and optimizing clothing structure. This method is also applicable to other types of compression clothing.