An investigation of waste foundry sand in asphalt concrete mixtures-Reference-Cited by-同舟云学术

An investigation of waste foundry sand in asphalt concrete mixtures

Published:2006-06 Issue:3 Volume:24 Page:269-274
ISSN:0734-242X
Container-title:Waste Management & Research: The Journal for a Sustainable Circular Economy
language:en
Short-container-title:Waste Manag Res

Author:

Bakis Recep¹,Koyuncu Hakan¹,Demirbas Ayhan²

Affiliation:

1. Anadolu University, Civil Engineering Department, Eskişehir, Turkey

2. Selcuk University, Chemical Engineering Department, Konya, Turkey,

Abstract

A laboratory study regarding the reuse of waste foundry sand in asphalt concrete production by replacing a certain portion of aggregate with WFS was undertaken. The results showed that replacement of 10% aggregates with waste foundry sand was found to be the most suitable for asphalt concrete mixtures. Furthermore, the chemical and physical properties of waste foundry sand were analysed in the laboratory to determine the potential effect on the environment. The results indicated that the investigated waste foundry sand did not significantly affect the environment around the deposition area.

Publisher

SAGE Publications

Subject

Pollution,Environmental Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1177/0734242X06064822

Reference12 articles.

1. Foundry Green Sands as Hydraulic Barriers: Laboratory Study

2. Braham, A. (2002) The Use of Blended Recycled Foundry Sand in Hot Mix Asphalt, Interim Report, p. 10. Asphalt Research Group, University of Wisconsin-Madison, Madison, Wisconsin, USA .

3. Javed, S. & Lowell, C. W. (1994) Uses of Waste Foundry Sand in Civil Engineering. Uses of Waste Foundry Sand in Highway Construction; Final Report, pp. 109-113. Geotest Engineering, Inc., Houston, Texas, USA .

Cited by 78 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Sustainable approaches in concrete production: An in-depth review of waste foundry sand utilization and environmental considerations;Environmental Science and Pollution Research;2024-03-10

2. A novel hybrid adaptive boosting approach for evaluating properties of sustainable materials: A case of concrete containing waste foundry sand;Journal of Building Engineering;2023-08

3. Experimental analysis of treated waste foundry and waste ceramics sand by replacement of fine aggregate in concrete;J CERAM PROCESS RES;2023

4. Initial extraction of sodium silicate from sidoarjo mud by alkaline fusion and water leaching;Heliyon;2023-06

5. Investigation of properties of concrete incorporating wood ash as partial substitute of cement and waste foundry sand as a partial substitute of sand;Materials Today: Proceedings;2023-06