Experimental study on energy and damage evolution of dry and water-saturated dolomite from a deep mine

Abstract

The deformation and failure of a rock is closely related to the strain energy consumption during the load process of rock. To investigate the effect of water on energy evolution and damage characteristics of dolomite samples from a deep mine, the uniaxial compression tests were carried out on dry and water-saturated dolomite samples at different burial depths (900 m–1200 m). The effects of water on the evolution characteristics of elastic and dissipative energy ratios ( Ue/ U and Ud/ U) during rock deformation and failure was analyzed. Based on the variation rate of damage factor ( Df), a new brittleness index is proposed, which can effectively characterize the brittleness characteristics of water-bearing dolomite. The results show that the uniaxial compressive strength and elastic modulus of the water-saturated dolomite are significantly reduced compared to dry sample. The energy and damage evolution process of dolomite can be divided into four stages: initial damage stage, stable damage stage, pre-peak accelerated damage stage and post-damage stage. The variation rate of damage factor of the rock samples in the stable damage stage and the pre-peak accelerated damage stage appeared to increase significantly after water saturation treatment. Compared with water-saturated samples, more pronounced energy hardening characteristics and brittleness characteristics were observed in dry samples. In addition, the possible impact on the stability of deep rock engineering after the deterioration of rock mechanical properties and energy storage properties caused by water was analyzed. Groundwater can somewhat reduce rock burst proneness. However, it also has the potential to lead to greater rock engineering destabilization and failure hazards.