Affiliation:
1. School of Applied Sciences, Marmara University, Goztepe Campus, Istanbul, Turkey
Abstract
In this study, two different polymer materials were used. In the joints made with friction stir spot welding, firstly (PP/PP and HDPE/HDPE) and then different materials (PP/HDPE, HDPE/PP) joining processes were carried. The influence of the tool rotational speed and the stirring time on joint formation and weld strength were determined. The temperature of the liquid welding materials varies according to the materials to be combined. High weld strengths were obtained at the friction stir spot welding of similar plastic sheets. The highest weld strengths were obtained in PP-PP welds. Low weld strengths were obtained at the friction stir spot welding of dissimilar plastic sheets because of immiscible and incompatible blends formed during the welding operation. The lowest weld strengths were obtained in PP-HDPE welds. The chemical composition and the phase morphology of the blends, the mechanical scission occurrence and the welding residual stresses determine the strength of the welds.
Subject
Materials Chemistry,Polymers and Plastics
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献