Optimization of sound-absorbing and insulating structures with 3D printed recycled plastic and tyre rubber using the TOPSIS approach

Abstract

Studies on recycled materials emerged during recent years. This paper investigates the properties of sound absorption and transmission loss of the structures of the perforated plastic panel (PPP) backed with the rubber granule panel (RGP). Under production conditions, such a structure could be produced using only waste. The normal incidence sound absorption and transmission loss of the structure was measured using ISO 10534-2 and ASTM E2611-17 standard methods, respectively. In this study, the plastic panel perforation holes were tilted in steps of 15°–45° compared to the vertical axis of the sample. Different thickness rubber panels were used as backing (12 mm, 22 mm and 27 mm). The results showed that the sound absorption and transmission loss increased with the angle of the perforation pore. To compare the different structures, the multi-criteria analysis using the technique for order of preference by similarity to ideal solution (TOPSIS) approach was done. The RGP thickness, sound absorption coefficient (SAC) and sound transmission loss (STL) were weighted as a criterion. The results of the multi-criteria analysis showed that the optimal structure for a possible application is PPP45°+ RGP 22 mm, which was ranked highest of all alternatives. The first peak of SAC reached 0.97 at 1000 Hz. In the frequency range of 250–1000 Hz, STL values reached up to 10.4 dB and in the frequency range of 1–4 kHz – 20.1 dB. The results obtained using RGP and PPP show promising development potential for sound absorption and insulation applications.