Optimization of Fiber Coatings for Transverse Performance: An Experimental Study-Reference-Cited by-同舟云学术

Optimization of Fiber Coatings for Transverse Performance: An Experimental Study

Published:1994-09 Issue:15 Volume:28 Page:1452-1466
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Case Scott W.¹,Carman Greg P.²

Affiliation:

1. Materials Response Group, Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061-0219

2. Materials Response Group, Department of Engineering Science and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061-0219; MANE Department, UCLA, Los Angeles, CA 90024-1597.

Abstract

In this manuscript we use a concentric cylinder model to determine the stresses in a composite material subjected to transverse loading. After selecting a failure criterion, it is possible for us to determine a fiber coating which optimizes the strain to failure of the composite material. Experimental results are presented for a model composite system and the results are compared to the analytical predictions. The model is shown to give reasonable agreement with the experimental data.

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/002199839402801504

Reference14 articles.

1. Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: I. Inplane and Interlaminar Shear Behavior of Graphite/Epoxy Composites

2. Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: II. Longitudinal (0°) and Transverse (90°) Tensile and Flexure Behavior of Graphite/Epoxy Composites

3. Elastic response of multi-directional coated-fiber composites

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Optimization of coating diameter of fiber optic sensors embedded in composite structures under arbitrary loading conditions;Smart Materials and Structures;2015-09-25

2. Interaction between optical fibre sensors and matrix cracks in cross-ply GRP laminates—part 1: passive optical fibres;Composites Science and Technology;2001-10

3. Recent progress of white light interferometric fiberoptic strain sensing techniques;Review of Scientific Instruments;2000

4. Effect of the Coating on the Stresses and Strains in an Embedded Fiber Optic Sensor;Journal of Composite Materials;1998-09

5. Optimization of fibre coating properties for fiber optic smart structures;Smart Materials and Structures;1996-08-01