Observing Inhomogeneity of Plastic Components in Carbon Fiber Reinforced Polymer Materials by ATR-FTIR Spectroscopy in the Micrometer Scale-Reference-Cited by-同舟云学术

Observing Inhomogeneity of Plastic Components in Carbon Fiber Reinforced Polymer Materials by ATR-FTIR Spectroscopy in the Micrometer Scale

Published:2008-06 Issue:12 Volume:42 Page:1231-1246
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Eibl S.¹

Affiliation:

1. Bundeswehr Research Institute for Materials, Explosives Fuels and Lubricants, Institutsweg 1, D-85435 Erding, Germany,

Abstract

A method based on micro attenuated total reflection (ATR) Fourier transform infrared spectroscopy (FTIR) is described to quantify inhomogeneity of plastic components in carbon fiber reinforced plastic material (CFRP). The investigated CFRPs contain an epoxy resin and a thermoplastic. Measurements on ground specimens at an inclined plane through the material allow the determination of the polymer distribution with a resolution of one micron regarding the depth. Three commercially available CFRPs (M18-1/G939, 8552/IM7, RTM 6) are characterized providing information on mechanical and thermal properties.

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0021998308091734

Reference43 articles.

1. Polymer analysis by pyrolysis gas chromatography

2. Effect of reinforcing fibres on the morphology of a toughened epoxy/amine system

3. Toughening of a trifunctional epoxy system: 1. Near infra-red spectroscopy study of homopolymer cure

4. Epoxy resin–polyethersulphone blends

5. Phase separation in epoxy resins containing polyethersulphone

Cited by 35 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Towards Sustainable Recycling of Epoxy-Based Polymers: Approaches and Challenges of Epoxy Biodegradation;Polymers;2023-06-12

2. Ply-Resolved Quantification of Thermal Degradation in Carbon Fibre-reinforced Polymers;Journal of Composite Materials;2023-01-06

3. Influence of Low and Extreme Heat Fluxes on Thermal Degradation of Carbon Fibre-reinforced Polymers;Applied Composite Materials;2022-06-24

4. Thermal and Principal Ablation Properties of Carbon-Fibre-Reinforced Polymers with Out-of-Plane Fibre Orientation;C;2021-08-21

5. Study on surface modification of silicone rubber for composite insulator by electron beam irradiation;Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms;2021-07