In-plane and Out-of-plane Characteristics of Three-dimensional Textile Composites-Reference-Cited by-同舟云学术

In-plane and Out-of-plane Characteristics of Three-dimensional Textile Composites

Published:2005-03 Issue:6 Volume:39 Page:543-556
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Takatoya Takeshi¹,Susuki Ippei²

Affiliation:

1. Structure Research Group, Institute of Space Technology and Aeronautics, Japan Aerospace Exploration Agency, 6-13-1 Ohsawa, Mitaka, Tokyo, 181-0015, Japan,

2. Structure Research Group, Institute of Space Technology and Aeronautics, Japan Aerospace Exploration Agency, 6-13-1 Ohsawa, Mitaka, Tokyo, 181-0015, Japan

Abstract

In an effort to achieve high performance and low cost manufacturing of composite structures, this study focuses on the resin film infusion (RFI) process and the three-dimensional (3-D) textile preform, which consists of in-plane and out-of-plane fibers for the near net-shape. Bismaleimide resin system is selected for the RFI process. In this study, the fundamental properties of 3-D textile composites under room temperature and dry conditions are characterized and compared with those of two-dimensional laminate composites of the same resin system. The 3-D textile composites show 0-13% lower in-plane properties, but 10-47% higher properties for open-hole and impact damage.

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0021998305047100

Reference9 articles.

Cited by 13 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Experimental Study of the Influence of Stitched Nylon Threads in Glass-Fiber-Reinforced Polymer Two-Dimensional Multilayer Composite on Tensile Strength;Applied Sciences;2023-10-25

2. Mechanical Performance of Unstitched and Silk Fiber-Stitched Woven Kenaf Fiber-Reinforced Epoxy Composites;Materials;2020-10-28

3. Polymer Composites with Maleimide Compounds;Multiphase Polymer Systems;2016-09-16

4. Dynamic micromechanical modeling of textile composite strength under impact and multi-axial loading;Composites Part B: Engineering;2015-12

5. Preparation of three-dimensional braided carbon fiber-reinforced PEEK composites for potential load-bearing bone fixations. Part I. Mechanical properties and cytocompatibility;Journal of the Mechanical Behavior of Biomedical Materials;2014-01