Expert Cure System for the Carbon Fiber Epoxy Composite Materials-Reference-Cited by-同舟云学术

Expert Cure System for the Carbon Fiber Epoxy Composite Materials

Published:1995-06 Issue:9 Volume:29 Page:1181-1200
ISSN:0021-9983
Container-title:Journal of Composite Materials
language:en
Short-container-title:Journal of Composite Materials

Author:

Choi Jin Ho¹,Lee Dai Gil¹

Affiliation:

1. Dept. of Precision Engineering and Mechatronics, Korea Advanced Institute of Science and Technology, 373-1, Kusong-dong, Yusong-ku, Taejon-shi 305-701, Korea

Abstract

In this paper, the expert cure system for thermosetting resin matrix composites, which controls the temperature and pressure of the autoclave according to the several rules, was developed to manufacture better composite products in shorter curing time. The rules were based on the on-line measured quantities such as the dielectric properties, temperature of the composites and the pressure of the autoclave. The curing time and the mechanical properties of the composite materials manufactured with the expert cure system were compared to those of the specimens manufactured with the conventional cure cycles

Publisher

SAGE Publications

Subject

Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/002199839502900903

Reference19 articles.

1. 1. Reinhart, T. J., ed. 1987. Composites. ASM International, pp. 743-778.

2. A Fundamental Approach to Resin Cure Kinetics

3. Curing Stresses in Composite Laminates

4. Curing of Epoxy Matrix Composites

5. Resin Flow During the Cure of Fiber Reinforced Composites

Cited by 24 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Effects of porosity on the cure kinetics and residual stress of a porous polymer;Materials Today Communications;2023-06

2. Intelligent methods for optimization design of lightweight fiber-reinforced composite structures: A review and the-state-of-the-art;Frontiers in Materials;2023-03-31

3. Thickness effect on the generation of temperature and curing degree gradients in epoxy–amine thermoset systems;Journal of Thermal Analysis and Calorimetry;2018-02-27

4. A partial differential equation model predictive control strategy: application to autoclave composite processing;Computers & Chemical Engineering;2004-04

5. On-line mixing during injection and simultaneous curing in liquid composite molding processes;Polymer Composites;2004