Affiliation:
1. Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology (KAIST), South Korea
2. Energy Materials Laboratory, Korea Institute of Energy Research (KIER), South Korea
Abstract
Although carbon fiber-reinforced silicon carbide matrix composites fabricated using the liquid silicon infiltration method exhibit high thermal and oxidation resistances, their physical characteristics are limited because of the presence of unreacted, free Si within the materials. To resolve this problem, ingots prepared by alloying Cr with Si in ratios of 0, 5, 10, 25, and 50 at% were melted and made to infiltrate the composite, resulting in the formation of CrSi2 in the unreacted, free Si region without degrading the composite’s properties. The CrSi2 in the composite material reduced the amount of free Si and caused minimal variation in the flexural strength while significantly improving the fracture toughness of the composite. The results of scanning electron microscopy and transmission electron microscopy analyses indicated that the improvement in the fracture toughness was due to the presence of an amorphous interlayer between the Si and CrSi2 phases, as well as because of a stress field surrounding the CrSi2 phase.
Subject
Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites
Cited by
8 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献