Enhanced electrical, mechanical, and viscoelastic properties of carbon-carbon composites using carbon nanotubes coated carbon textile as reinforcement

Abstract

In this research work, Carbon-carbon composites (CCCs) were fabricated via carbonization of carbon nanotubes (CNTs)-coated carbon textile (CNT-CF) reinforced polymer matrix composites (PMCs) preforms at 600, 900, 1200, and 1500 °C in a tubular furnace. To obtain CNT-CF, MWCNTs were produced radially on the surface of the nano-nickel particles plated carbon textile at 700°C using catalytic chemical vapor deposition method and C2H2 gas as a carbon source. The effects of CNT coating on carbon textiles were evaluated using FESEM, HR-TEM, XRD, Raman, TGA, and BET analysis. The effects of heat treatment temperatures on CNTs coated and uncoated PMCs manufactured using simple hand-layup method subsequently hot compressing were evaluated through XRD, FESEM, density, electrical conductivity measurement, tensile and flexural test, and viscoelastic properties using DMTA. The CNT coated CCCs obtained at 1500°C exhibited ∼ 66, 62, 83, 27, 44, 30, and 36% enhancement in electrical conductivity, storage modulus, loss modulus, tensile strength, Young’s modulus, flexural strength, and flexural modulus of CNT coated CCCs, respectively compare to uncoated CCCs. Moreover, substantial enhancement in thermal stability of PMCs and CCCs make CNT-CF as one of the competent alternate reinforcement for the fabrication of structural parts used in high-performance applications.