Affiliation:
1. Energy and Mechanical Engineering Department, Shahid Beheshti University, Tehran, Iran
Abstract
Effects of fog condensation and fine dust on the high-voltage insulator surface are harmful. The insulator housing material (silicone rubber) must be changed in order to allow a controlled leakage current to flow on the surface and causes Joule heating effect. Accordingly, surface temperature of the insulator is increased and fog condensation on the insulator surface is prevented. For this purpose, silicone rubber - multiwalled carbon nanotubes (MWCNT) nanocomposites (SRCNT) were prepared using two different processes: a solution-blending (SB) method and a dry-state of melt-blending (MB) method. Field Emission Scanning Electron Microscopy (FESEM) images indicated that the MWCNT dispersion in silicone rubber matrix of SRCNT samples produced by SB method is much better than that of MB method. Fourier Transform Infrared (FTIR) spectroscopy determined the possibility of a greater reduction in hydrophobicity properties in the sample prepared by the SB method compared to the sample made by the MB method, and the contact angle measurements confirmed this expectation. Furthermore, in a same MWCNT concentration, the electrical conductivity of SRCNT samples prepared by SB method are greater than those produced by MB method. Results showed that MB is a high efficient method for producing the SRCNT in a large amount.
Subject
Materials Chemistry,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献