Design improvement for suction shape in rotary compressor

Author:

Kim Joonhyung1ORCID,Kwon Munseong1,Park Jaewoo1,Park Sunghyuk1ORCID,Hwang Woong1

Affiliation:

1. Advanced C&M Development Lab, Samsung Electronics Co., Ltd., Suwon-si, Republic of Korea

Abstract

Rotary compressors applied to heating and cooling cycles accounts for a large proportion of the total energy consumed in the system. Therefore, improving compressor efficiency is crucial in order to reduce energy consumption. Design review and improvement efforts have primarily focused on compression and discharge parts with high pressure. However, due to the limitations in design improvements for the compression and discharge parts, enhancements for other components are necessary to further increase compressor efficiency. In this study, the design of the suction part of the rotary compressor was modified using FSI (Fluid-Structure Interact) analysis scheme. In order to improve the design of the suction shape, new suction shape types were devised as alternatives to the existing through type. Both the newly devised C-type and E-type suction shapes presented an increase in cooling capacity due to reduced suction resistance, with the E-type demonstrating greater improvement compared to the C-type. Consequently, a verification of the effect based on the detailed design dimensions was further conducted for the E-type suction shape. The final selected improved model increased the suction flow rate by approximately 2.5% compared to the base model. This indicates that significant improvement for the compressor efficiency can be achieved through modifying designs in parts other than the compression and discharge sections. In addition, a design improvement process was established to analyze internal flow using FSI analysis.

Publisher

SAGE Publications

Reference20 articles.

1. Design optimization of a rolling piston compressor for refrigerators

2. Experimental investigation on the internal working process of a CO2 rotary vane expander

3. Experimental study on P-V diagram and valve displacement of a HC290 rotary compressor

4. Geng W, Liu CH, Wang YZ. The performance optimization of rolling piston compressors based on CFD simulation. Purdue Conference, West Lafayette, IN, USA, 2004. Paper 1621.

5. Tan Q, Liu Z, Cheng J, et al. Effective flow and force areas of discharge valve in a rotary compressor. Purdue Conference, West Lafayette, IN, USA, 2014. Paper 2266.

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3