Three-dimensional finite element modeling of rough to finish down-cut milling of an aluminum alloy

Abstract

This contribution deals with a computational investigation highlighting the effects of cutting speed and depth of cut on chip morphology and surface finish for down-cut milling case. The global aim concerns the comprehension of multiphysical phenomena accompanying chip formation in rough, semifinish, and finish cutting operations, exploiting a three-dimensional finite element model. Numerical work has been performed in two phases. In the first phase, a three-dimensional model for rough cut operation has been validated with the experimental results, including chip morphology and cutting force evolution for an aerospace grade aluminum alloy A2024-T351. In the second phase, the model has been extended to semifinish and finish three-dimensional cutting operations. The numerical findings show that as depth of cut decreases (toward finish cutting), spatial displacement of workpiece nodes along the depth of cut increases. This represents an increase/extension in the percentage of volume undergoing shear deformation, resulting in higher dissipation of inelastic energy, hence contributing to size effect in finish cutting operation. The results also depict that material strain rate hardening enhances the material strength at higher cutting speeds. These material strengthening phenomena help to generate a smooth continuous chip morphology and better surface texture in high-speed finishing operations. The study highlights the significance of three-dimensional numerical modeling to better understand the chip formation process in semifinish and finish machining operations, regardless of the immense effort in computational time.