How to Reduce 3-Deoxyglucosone and Acetaldehyde in Peritoneal Dialysis Fluids

Abstract

Objective 3-Deoxyglucosone (3-DG) and acetaldehyde were found to be the major reactive carbonyl compounds in conventional heat-sterilized peritoneal dialysis fluids (PDFs). The aim of this study was to identify factors in the production of PDFs promoting or inhibiting the formation of acetaldehyde and 3-DG. Design Single-chamber bag PDFs with different buffer systems and pH values were analyzed for acetaldehyde. 3-Deoxyglucosone was determined in double-chamber bag PDFs with different pH values, in commercially available samples, and in double-chamber products stored under defined conditions. Results Acetaldehyde was found in the presence of lactate and malate, whereas in 2-hydroxybutanoate-buffered solution propionaldehyde was detected instead. Between pH 5.0 and 6.0 the acetaldehyde content in lactate-buffered solutions increased strongly. The concentration of 3-DG in the chamber containing glucose in double-chamber bags increased between pH 3.0 and 5.0 by a factor of 6. 3-Deoxyglucosone concentrations in commercially available products vary greatly, reflecting the different pH values of these products. A time- and temperature-dependent reaction leads to a reduction in 3-DG and an increase in 5-hydroxymethyl-furan-2-carbaldehyde during storage. Conclusion Acetaldehyde is produced by a reaction that requires both lactate and glucose. Thus, its formation can be prevented by a separation of the reaction partners, glucose and lactate, in a double-chamber bag. In double-chamber bags, pH greatly influences the formation of 3-DG. Minimal formation is observed in the region of pH 3.0. This finding should be taken into account for the development of new double-chamber bag PDFs.