Effect of teak wood on recycled HDPE/pine wood composites subjected to termite attack and accelerated weathering

Abstract

This study aimed to investigate the impact of including teak wood in recycled high-density polyethylene wood plastic composites (WPC) with pine wood on their resistance to degradation caused by termite attack and accelerated weathering. A 23 factorial experimental design was conducted with three repetitions in the center to analyze the weight loss and termite mortality during the experiments. The factors studied were the days of exposure to accelerated weathering, days of exposure to termite attack, and the concentration of teak wood in the composite. Surface characterizations (SEM and FTIR) were carried out to analyze the exposed surfaces and determine the chemical modification of the composite components. The results showed that the WPC manufacturing process promotes a heterogeneous distribution of the wood particles, being greater within the center of the samples than on the surface. Specimens exposed to both accelerated weathering and termite attack resulted in a certain weight loss and termite mortality, depending on the material, conditions of exposure, and the content of teak wood in the WPC. When those compounds were subjected to accelerated weathering followed by termite attack they exhibited a higher termite attack. The presence of teak wood in the WPC produced a reduction in the effects of termite attack and accelerated weathering on weight loss and an increase in termite mortality compared to the WPC with only pine wood, as teak wood contains extractables with termiticidal action. The lowest value of weight loss (0.06%) was observed for the WPC with the highest amount of teak wood with termite attack, resulting in a termite mortality rate of 100% after 17 days of exposure.