Efficacy of various structural forms of disentangled polyethylene laminates against low velocity impact

Abstract

Filament-based unidirectional laminates of para-aramid and ultra-high molecular weight polyethylene exhibit excellent impact resistance performance. This research explored the possibility of using disentangled polyethylene (DPE) tape, instead of filaments, as an alternative impact resistant material. The effects of laminate structure, binding resin content and processing temperature on the tensile and impact properties of cross-ply laminates prepared from DPE tape was investigated. Three types of cross-ply laminates prepared from tape, woven fabric of untwisted tape and woven fabric of twisted tape were explored. Tensile properties and low velocity impact resistance of laminates were evaluated. Laminate made from woven untwisted tape showed much lower impact energy absorption than cross-ply laminate, while the woven twisted tape based laminate performed the worst. Cross-ply laminates made with low resin content showed better tensile and impact resistance performances. Cross-ply laminates prepared at higher moulding temperature showed significantly enhanced impact energy absorption than its counterpart prepared at a lower temperature. Therefore, cross-ply laminate of DPE tape with low resin content is ideal for impact resistance applications.