The effect of surface functionality of carbon nanotubes on mechanical and tribological behaviours of carbon fibre-filled styrene–butadiene rubber composite-Reference-Cited by-同舟云学术

The effect of surface functionality of carbon nanotubes on mechanical and tribological behaviours of carbon fibre-filled styrene–butadiene rubber composite

Published:2016-08-04 Issue:9 Volume:29 Page:1167-1175
ISSN:0892-7057
Container-title:Journal of Thermoplastic Composite Materials
language:en
Short-container-title:Journal of Thermoplastic Composite Materials

Author:

Chilan Cai¹,Wenxia Wang¹,Jianguo Zhang²

Affiliation:

1. School of Mechanical and Electronic Engineering, Shanghai Second Polytechnic University, Shanghai, People’s Republic of China

2. School of Mechanical Engineering, Shanghai Institute of Technology, Shanghai, People’s Republic of China

Abstract

The friction and wear behaviours of carbon fibre (CF)- and carbon nanotube (CNT)-filled styrene–butadiene rubber (SBR) composite was investigated in a ring-on-block wear tester. Ti6Al4V alloy ring (with a diameter of 28 mm) was selected as the counter body in this study. It was found that the detachment of particles, ripples and ploughs were observed under higher load. The addition of CNT efficiently improves the interfacial adhesion of CF/SBR composite. Both the friction coefficient and wear increased with load, and the CNT-filled one showed lower friction coefficient and wear.

Publisher

SAGE Publications

Subject

Condensed Matter Physics,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0892705714556834

Reference12 articles.

1. Tribological behaviors of plasma-treated carbon composite grooved surfaces

2. Tribological study of three-dimensionally braided carbon fiber–nylon 6 composites against 316L stainless steel

3. A study of the tribological behavior of nano-ZnO-filled polyurethane composite coatings

4. Glassy carbon particles as component to modification of tribological properties

5. Mechanical and tribological behavior of PTFE–polyoxadiazole fiber composites. Effect of filler treatment

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Tribological performance analysis of sustainable basalt micro-filler loaded bio-based polypropylene and high density polyethylene composites;Journal of Thermoplastic Composite Materials;2024-01-29

2. Synergism of fillers on adhesive and abrasive wear of thermoplastic copolyester elastomer composites;Tribology of Polymer Composites;2021

3. Imidazolium ionic liquid compatibilizers in melt-blended styrene-butadiene rubber/aramid pulp composites;Polymer Bulletin;2018-10-09

4. Aramid pulp with physisorbed imidazolium ionic liquids for solvent-casted enhanced styrene-butadiene rubber composites;Journal of Applied Polymer Science;2018-06-20

5. Effect of adding carbon fiber on conductive stability of acrylonitrile-butadiene rubber composites;Journal of Applied Polymer Science;2018-05-31