The Friction and Wear Properties of Thermoplastic PA6 Composites Filled with Carbon Fiber-Reference-Cited by-同舟云学术

The Friction and Wear Properties of Thermoplastic PA6 Composites Filled with Carbon Fiber

Published:2009-07-30 Issue:3 Volume:23 Page:337-349
ISSN:0892-7057
Container-title:Journal of Thermoplastic Composite Materials
language:en
Short-container-title:Journal of Thermoplastic Composite Materials

Author:

Li J.¹,Xia Y.C.²

Affiliation:

1. School of Mechanical & Electronic Engineering, Shanghai Second Polytechnic University, Shanghai 201209, P.R. China,

2. School of Mechanical & Electronic Engineering, Shanghai Second Polytechnic University, Shanghai 201209, P.R. China

Abstract

The tribological performance of PA6 and carbon fiber reinforced polyamide 6 (CF/PA6) under dry sliding condition was examined. Different contents of carbon fibers were employed as reinforcement. All filled and unfilled polyamide 6 composites were tested against CGr15 ball and representative testing was performed. The effects of carbon fiber content on tribological properties of the composites were investigated. The worn surface morphologies of neat PA6 and its composites were examined by scanning electron microscopy and the wear mechanisms were discussed. Moreover, all filled polyamide 6 have superior tribological characteristics to unfilled polyamides 6. The optimum wear reduction was obtained when the content of carbon fiber is 20 vol%.

Publisher

SAGE Publications

Subject

Condensed Matter Physics,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0892705708103397

Reference29 articles.

1. Effects of polyamide 6 on the crystallization and melting behavior of β-nucleated polypropylene

2. Effect of crystalline form on the tribological properties of PA46/HDPE polyblends

3. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites

4. The tribological behaviour of different engineering plastics under dry friction conditions

5. Water-absorptivity and mechanical behaviors of PTFE/PA6 and PTFE/PA66 blends

Cited by 27 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Microstructural, Mechanical and Tribological Behaviors of Cu/LLDPE-Based Composite Coatings for Lightweight Applications;Lubricants;2024-06-21

2. Tribological characteristics and wear mechanisms of reinforced composites against steel;Journal of Thermoplastic Composite Materials;2023-09-22

3. Investigations of the Friction and Wear Resistance of the Natural Fiber‐Reinforced Polyamide Composites;Tribological Properties, Performance and Applications of Biocomposites;2023-09-08

4. Tribological and Mechanical Applications of Liquid-Crystal-Polymer-Modified Carbon-Fiber-Reinforced Polyamide–Polyurethane Composites;Polymers;2023-04-25

5. Investigation of Dry Sliding Friction Wear Behavior of CuSn11 Bronze Plain Bearing Applying Impregnated Graphite-Filled PTFE;Tribology Transactions;2022-08-16