An Active Diagnostic System for Structural Health Monitoring of Rocket Engines

Abstract

An active diagnostic system using built-in piezoelectric actuator/sensor networks was developed for monitoring crack growth in a rocket engine pipe. The diagnostic system combines a sensor network, portable diagnostic hardware and data analysis software which allows for real-time in situ monitoring and long term tracking of the structural integrity of pressure vessels. Experimental data shows that the system can detect a surface crack as small as 4 mm and a through-crack as small as 2 mm in the high pressure engine pipe made of Inconel 718. It was found that the actuator-sensor paths that are most sensitive to crack growth are the ones in which the crack is growing away from, rather than towards the path. This discovery will provide important guidelines for the design of a sensor network for crack detection. It was also observed that the bending mode (equivalent to the A0 mode in plates) is more sensitive than the longitudinal mode (equivalent to the S0 mode in plates) to crack growth.