Distribution of slip regions on the fiber–matrix interface of ceramic matrix composites under arbitrary loading-Reference-Cited by-同舟云学术

Distribution of slip regions on the fiber–matrix interface of ceramic matrix composites under arbitrary loading

Published:2015-07-22 Issue:20 Volume:34 Page:1713-1723
ISSN:0731-6844
Container-title:Journal of Reinforced Plastics and Composites
language:en
Short-container-title:Journal of Reinforced Plastics and Composites

Author:

Gao Xiguang¹,Zhang Sheng¹,Fang Guangwu¹,Song Yingdong¹²

Affiliation:

1. Jiangsu Province Key Laboratory of Aerospace Power System, College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, P.R. China

2. State Key Laboratory of Mechanics and Control Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, P.R. China

Abstract

The distribution of slip regions on the fiber–matrix interface of unidirectional fiber-reinforced ceramic matrix composites is described to simulate the constitutive behavior under arbitrary loading and unloading. The appearance and disappearance of forward and reverse slip regions are discussed and the stress distribution when there are any number of forward and reverse slip regions is also provided. The interface slipping and constitutive behavior after closure of matrix cracks under compressive loading are analyzed. Based on the distribution model of slip regions, the stress–strain response of unidirectional fiber-reinforced ceramic matrix composites under arbitrary loading and unloading is calculated.

Publisher

SAGE Publications

Subject

Materials Chemistry,Polymers and Plastics,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites

Link

http://journals.sagepub.com/doi/pdf/10.1177/0731684415596596

Reference12 articles.

1. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview

2. Fatigue of ceramic matrix composites

3. Estimation of interfacial properties from hysteretic energy loss in unidirectional ceramic matrix composites

4. Estimation of Interfacial Shear in Ceramic Composites from Frictional Heating Measurements

Cited by 19 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Variability of sub-regional fibre strength in 3D orthogonal SiC fabrics and its effect on the constitutive response of composites;Journal of the European Ceramic Society;2023-12

2. Progressive failure analysis of needle-punched C/SiC composites based on multiscale finite element model;Composite Structures;2023-04

3. A Review on Ceramic Matrix Composites and Environmental Barrier Coatings for Aero-Engine: Material Development and Failure Analysis;Coatings;2023-02-04

4. Sensitivity of Strength Via Temperature for SiC/SiC Composites and SiC Fibers in an Oxygen-Free Environment;Applied Composite Materials;2021-08-24

5. Multi-scale modeling and experimental study of fatigue of plain-woven SiC/SiC composites;Aerospace Science and Technology;2021-07