Affiliation:
1. Institute of Aeronautics and Astronautics National Cheng-Kung University Tainan, Taiwan 70101 Republic of China
Abstract
The objective of this research was to investigate the effects of manufactur ing variables (injection pressure, pre-heated temperature and vacuum assistance) on resin transfer molding (RTM). Specimens were made of 40 plies of TGFC-7628 cloth fiberglass mats or 12 plies of TGFW-600 woven roving fiberglass mats under different process condi tions. The fiber volume contents of the specimens were 50.3 % or 45% in the experiments. The flexural strengths of all the finished products tested by the method of three point bend ing were compared to each other to understand the influences of each process variable on the RTM products. Both the pre-heated temperatures and the injection pressure were found to affect the quality of the RTM product.
Subject
Materials Chemistry,Polymers and Plastics,Mechanical Engineering,Mechanics of Materials,Ceramics and Composites
Reference8 articles.
1. Patel, N., L.J. Lee, W. B Young, and M.J. Liou. 1991. ANTEC '91, p. 1985.
2. Resin impregnation during composites manufacturing: Theory and experimentation
Cited by
27 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献