Removal of Surface Loop from Stitched Composites Can Improve Compression and Compression-after-Impact Strengths

Abstract

Stitching through-the-thickness (TTT) of composite materials produces a surface loop of yarn between successive penetrations. The surface loop is pressed into the surface layers of the composite material during the curing of the laminate, kinking the in plane fibers near the surface of the material. The compression strength and compression- after-impact (CAI) strengths of carbon-epoxy specimens were measured with and without the surface loop. Removal of the surface loop had no influence on failure mode or failure mechanism, but did significantly increase the compression and CAI strengths.