Measuring Visualized Joint Surface in Hallux Metatarsophalangeal Arthroscopy

Abstract

Background: Arthroscopy has been increasingly used to evaluate small joints in the foot and ankle. In the hallux metatarsophalangeal (MTP) joint, little data exist evaluating the efficacy of arthroscopy to visualize the articular surface. The goal of this cadaveric study was to determine how much articular surface of the MTP joint could be visualized during joint arthroscopy. Methods: Ten fresh cadaveric foot specimens were evaluated using standard arthroscopy techniques. The edges of the visualized joint surface were marked with curettes and Kirschner wires; the joints were then surgically exposed and imaged. The visualized surface area was measured using ImageJ® software. Results: On the distal 2-dimensional projection of the joint surface, an average 57.5% (range, 49.6%-65.3%) of the metatarsal head and 100% (range, 100%-100%) of the proximal phalanx base were visualized. From a lateral view of the metatarsal head, an average 72 degrees (range, 65-80 degrees) was visualized out of an average total articular arc of 199 degrees (range, 192-206 degrees), for an average 36.5% (range, 32.2%-40.8%) of the articular arc. Conclusion: Complete visualization of the proximal phalanx base was obtained. Incomplete metatarsal head visualization was obtained, but this is limited by technique limitations that may not reflect clinical practice. Clinical Relevance: This information helps to validate the utility of arthrosocpy at the hallux metatarsophalangeal joint.