Planning surface texturing for reduced friction in lubricated sliding using surface roughness parameters skewness and kurtosis-Reference-Cited by-同舟云学术

Planning surface texturing for reduced friction in lubricated sliding using surface roughness parameters skewness and kurtosis

Published:2012-03-07 Issue:8 Volume:226 Page:661-667
ISSN:1350-6501
Container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Author:

Sedlaček M¹,Podgornik B²,Vižintin J¹

Affiliation:

1. Centre for Tribology and Technical Diagnostics, University of Ljubljana, Slovenia

2. Institute of Metals and Technology, Slovenia

Abstract

The aim of this research was to confirm skewness and kurtosis parameters as two main roughness parameters which describe tribological properties of contact surfaces, especially pointing out their application in surface texturing. Based on our previous virtual texturing findings, steel samples were laser textured in a manner to achieve micro-channels with different spacing and width of the channels. Lubricated tests under different contact conditions were done to evaluate their influence on friction. It was confirmed that higher Sku and more negative Ssk can be used for planning surface texturing.

Publisher

SAGE Publications

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1177/1350650112439809

Reference23 articles.

1. Improving Tribological Performance of Mechanical Components by Laser Surface Texturing

2. State of the Art in Laser Surface Texturing

3. Control of friction

4. A Theory of Lubrication by Microirregularities

5. A laser surface textured hydrostatic mechanical seal

Cited by 40 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Influence of the Machining Process on the Wear Properties of Self-Mated Structural Steel in Dry Sliding Conditions;Metals;2024-06-07

2. Laser Surface Texturing for Ground Surface: Frictional Effect of Plateau Roughness and Surface Textures under Oil Lubrication;Lubricants;2024-01-11

3. Evaluation of surface tortuosity on the corrosion resistance of organic coatings using laser texturing process;Journal of Laser Applications;2023-12-04

4. The Effect of Steel Electropolishing on the Tribological Behavior of a Steel–Bronze Pair in the Mixed and Boundary Lubrication Regimes;Lubricants;2023-08-01

5. The effect of laser surface textures on the adhesion strength and corrosion protection of organic coatings - Experimental assessment using the pull-off test and the shaft load blister test;Progress in Organic Coatings;2023-07