Affiliation:
1. Department of Mechanical Engineering, The University of Tokyo, Tokyo, Japan
2. Tokyo Metropolitan Industrial Technology Research Institute, Tokyo, Japan
Abstract
Friction tests using ceramic pins against fully hydrogenated diamond-like carbon (polymer-like carbon, PLC) film under H2/He mixed gas or pure H2 gas environment were conducted. The test results of ZrO2 (YSZ: yttria-stabilized zirconia) pin slid against PLC film with an applied load of 4.9 N showed that the friction coefficient dropped to the tribometer noise level (friction fade-out, FFO) as low as 0.0002. In another experiment with the same materials and with an applied load of 30.4 N, the friction coefficient dropped to 0.0001–0.0005, which continued more than 4 h. Optical microscope and scanning electron microscopic observations, nano-indentation, surface profiler, X-ray photoelectron spectroscopy, Raman, and time-of-flight secondary ion mass spectrometry measurements were conducted and the mechanism for inviting FFO is investigated. It is found by an optical microscopic observation that the transfer film has small blisters, indicating some gaseous substance is generated at the ZrO2 surface. It is discussed based on the measurements that ZrO2 catalysis plays very important roles for gaseous substances generation and for H-passivation on both PLC and transfer film surfaces, which are closely relating to FFO through gas-lubrication effect, and through reducing adhesive force, respectively.
Subject
Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献