A rapid 2D-FDTD method for damage detection in stiffened plate using time-reversed Lamb wave

Abstract

This study proposes an improved two-dimensional finite-difference time-domain method (2D-FDTD) to simulate the propagation of guided waves in three-dimensional (3D) stiffened plates, which can greatly reduce the calculation amount and accelerate the simulation process. This method can be used for damage-detection imaging based on time-reversal with wavefield reconstruction (TR-RW) as a quick numerical simulation of wavefield is available. First, the piezoelectric wafer active sensors excite and collect Lamb wave signals in the damaged stiffening plate, after which these signals are reversed in the time domain. Second, the TR signals are again triggered by each sensor in turn on the reconstructed numerical model of the tested structure with 2D-FDTD. Third, the wavefield animation is obtained through simulation. Finally, the energy of the wavefield can be focused in certain areas, indicating the location of the damage. As an example, TR-RW, combined with 2D-FDTD method, is adopted to detect damage in an integral grid-stiffened plate, showing that the proposed 2D method can decrease the calculation time from dozens of minutes in the 3D model to dozens of seconds, which is of great significance for damage-detection applications. Furthermore, compared with the virtual TR method, the combined TR-RW and 2D-FDTD method can overcome the multipath effect and improve the damage location accuracy of stiffened structures.