Influence of joint models on lower-limb musculo-tendon forces and three-dimensional joint reaction forces during gait

Abstract

Several three-dimensional (3D) lower-limb musculo-skeletal models have been developed for gait analysis and different hip, knee and ankle joint models have been considered in the literature. Conversely to the influence of the musculo-tendon geometry, the influence of the joint models - i.e. number of degrees of freedom and passive joint moments - on the estimated musculo-tendon forces and 3D joint reaction forces has not been extensively examined. In this paper musculo-tendon forces and 3D joint reaction forces have been estimated for one subject and one gait cycle with nine variations of a musculoskeletal model and outputs have been compared to measured electromyographic signals and knee joint contact forces. The model outputs are generally in line with the measured signals. However, the 3D joint reaction forces were higher than published values and the contact forces measured for the subject. The results of this study show that, with more degrees of freedom in the model, the musculo-tendon forces and the 3D joint reaction forces tend to increase but with some redistribution between the muscles. In addition, when taking into account passive joint moments, the 3D joint reaction forces tend to decrease during the stance phase and increase during the swing phase. Although further investigations are needed, a five-degree-of-freedom lower-limb musculo-skeletal model with some angle-dependent joint coupling and stiffness seems to provide satisfactory musculo-tendon forces and 3D joint reaction forces.