Simulation and experimental investigation of multi-walled carbon nanotubes/aluminum composite fabrication using friction stir processing

Abstract

Multi-walled carbon nanotube/aluminum composites are fabricated on Al–Si cast alloy employing friction stir processing. First, the microstructure of the stir zone, as well as the effect of process parameters on the size of silicon particles, is investigated. Then, the process is numerically simulated using a thermo-mechanically coupled three-dimensional finite element method model. Material flow, as the primary reason for the dispersion of reinforcing particles, is considered in the numerical model, and proper conditions to obtain a uniform dispersion of multi-walled carbon nanotubes are determined. Scanning electron microscope analysis is carried out to consider the particle distribution in the texture of the stir zone. The results show that the particle distribution improves significantly by changing the tool rotation direction between the friction stir processing passes. The hardness test is accomplished on the cross-section of the friction stir processed specimens, and finally, the wear test is performed to compare the wear resistance of the composites with the base alloy. The results show that the wear resistance and hardness of the produced composites are considerably enhanced compared to the base alloy.