Affiliation:
1. Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian, China
2. Faculty of Engineering and Physical Sciences, University of Southampton, Southampton, UK
Abstract
Springback is always a technical problem in sheet metal forming. In this article, the rapid springback compensation control of two-dimensional hull plate is realized by theoretical calculation and numerical simulation. For the cylindrical shell, according to the bending forming theory of medium and thick plates, the total elastic-plastic bending moment is established, and the curvature change before and after springback is deduced. The curvature correction coefficient is determined by the precise numerical simulation technology. At the same time, the validity of the method is verified by cold bending experiment. For the shell with variable curvature, it is divided into several cylindrical surfaces according to the curvature gradient of its geometric section line. The compensation curvature array is obtained by the correction compensation algorithm of springback curvature of cylindrical plate, and the algorithm is verified by numerical simulation. The results show that the method is very close to the expected results. Thus, the efficiency and precision of forming will be improved, and the foundation of digitization of sheet metal forming is established.
Funder
China Scholarship Council
National Natural Science Foundation of China
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献