Theoretical modeling of low-velocity impact behavior of sandwich-structured composites reinforced with weft-knitted spacer fabric

Abstract

The aim of this paper is to develop an analytical model to predict indentations of the impactor on the composites reinforced with weft-knitted spacer fabric using Hertz contact law. For this purpose, simply supported rectangular plate with partially load developed by Timoshenko was applied to analyze the deflection of top face, and the concepts of the buckling of initially curved struts were used to find the buckling of Z-fibers. To evaluate the accuracy of the model, the effect of the number of Z-fiber per unit area and elastic modulus of Z-fiber were investigated. The results showed that in the outside the contact area, the impact force bends the layer and causes the Z-fibers to buckle, but no indentation occurs. Inside the contact zone, the indentation has occurred, in addition to the layer deflection and Z-fiber buckling. Also, indentations in both X and Y directions decrease by increasing the Z-fiber density. In addition, the higher the z-fiber modulus leads to fewer indentations. Decreasing the angle coefficient of Z-fibers leads to increase their buckling resistance. Moreover, a reasonable agreement was observed between theoretical and experimental results; so that the maximum error of prediction was less than 20%. Furthermore, the proposed model can give the indentation of different points of sandwich-structured composites according to their coordinates.