Affiliation:
1. Department of Mechanical Engineering, Shiv Nadar University, Delhi-NCR, India
2. Department of Civil Engineering, National Institute of Technical Teachers’ Training and Research, Bhopal, India
3. Department of Mechanical Engineering, Chandigarh University, Chandigarh, India
Abstract
The present study deals with the fabrication of hybrid composites using biodegradable and ecologically friendly natural fibers and a recyclable thermoplastic matrix. Pure and hybrid natural fiber composites of high-density polyethylene (HDPE) with Kenaf and Ramie fiber, 20 wt%, were fabricated using microwave-assisted compression molding. The composite's mechanical characterization was performed using tensile, flexural, impact, and hardness tests. X-ray diffraction was done to investigate the crystallinity percentage, and scanning electron microscopy of fractured surfaces was performed to determine failure mechanisms. The hybrid composite of HDPE/Ramie and Kenaf exhibited the highest ultimate tensile strength (UTS) at 29.3 ± 1.2 MPa, surpassing HDPE/Kenaf (21.6 ± 1.1 MPa) and HDPE/Ramie (24.3 ± 1.4 MPa) composites. In terms of flexural strength, HDPE/Ramie demonstrated the highest at 19.9 ± 1.5 MPa, while HDPE/Kenaf had the lowest at 18 ± 1.1 MPa. The hybrid composite's flexural strength was intermediate at 19 ± 1.3 MPa. Impact strength followed a similar trend, with the hybrid composite leading at 40.2 KJ/m2, followed by HDPE/Ramie (26.9 KJ/m2) and HDPE/Kenaf (12.3 KJ/m2). Hardness tests revealed the highest hardness in the hybrid composite and the lowest in HDPE/Kenaf. A computational study has been performed to develop a model for predicting the hybrid composites. A strong agreement between both studies has been observed. The developed composite is deemed suitable for various light-duty applications, such as roofing, car interior panels, and mobile covers, offering potential benefits in reducing carbon footprint.