Affiliation:
1. Mechanical Engineering Department, National Institute of Technology Srinagar, India
2. Mechanical Engineering Department, Indian Institute of Technology Ropar, India
Abstract
To investigate osteoporosis caused by aging and the dynamic behavior of male bovine trabecular bone, three age groups of male bovine trabecular bone were chosen, and micro-computed tomography (CT) analysis was performed to develop an image-based bio-inspired computer-aided design (CAD) model of the bone structure. Further experimental and computational studies were carried out to examine the rate-dependent behavior and compressive energy-absorbing capacity of the structure as a function of age. To evaluate this study, a micro-CT-based CAD model of the structure was 3D printed using ABS-M30i material and subjected to quasi-static compression (low strain rate) and high strain rate (split Hopkinson pressure bar) compression. The findings show that 3D-printed bovine structures have distinct high-rate dependence at strain rates greater than 430 s−1, as well as sensitivity to strain rate in terms of peak stress, plateau stress, and energy absorption capacity. Using rate-dependent properties, the Johnson–Cook damage plasticity model was used in computational analysis to explain the dynamic behavior of bone due to osteoporosis. Overall, there is good agreement between the numerical simulations and the experimental data, which was obtained by verifying and validating the model against the experimental results.