Affiliation:
1. Kumoh National Institute of Technology, Gumi, Republic of Korea
Abstract
In this study, we have developed a thin film adhesion evaluation system for diamond coating tool, which is mainly used for CFRP processing. CFRP is widely used in aviation and automobile industries. Because of the high surface hardness of the diamond coating tool, it is difficult to evaluate the adhesive strength of the tool, and it is difficult to quantitatively evaluate the existing adhesion force evaluation method and it is costly. This study has developed an evaluation method to measure the adhesive force based on the data of the grinding process using a low-cost polishing pad. When the frictional force and the shearing force are applied to the specimen by the sanding belt, friction is continuously generated between the coating layer and the belt, and peeling occurs at the moment when a specific load is applied. Acceleration, load, and torque values that occur during each experiment are collected through acceleration sensors, load cells, and torque sensors. The data obtained through the experiments are subjected to FFT processing and analysis. As a result, the peeling point and the critical load value at this point are identified and referred to as the adhesion force of the coating layer.
Subject
Applied Mathematics,Control and Optimization,Instrumentation
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Power quality control method of flexible AC transmission project based on harmonic suppression;Third International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2023);2023-07-18