An Experimental Study on the Thermoplastic Filament Winding Process using Commingled Yarns-Reference-Cited by-同舟云学术

An Experimental Study on the Thermoplastic Filament Winding Process using Commingled Yarns

Published:2002-03 Issue:2 Volume:11 Page:096369350201100
ISSN:2633-366X
Container-title:Advanced Composites Letters
language:en
Short-container-title:Advanced Composites Letters

Author:

Kim Sun Kyoung¹,Kim Gong Min¹,Kim Hee June¹,Lee Woo IL¹

Affiliation:

1. Department of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742, Korea

Abstract

A filament winding process of commingled yarn is investigated. This study aims to verify the feasibility of the proposed winding process experimentally. A laboratory scale winding system is built which can perform in situ consolidation using a hot nitrogen gas torch. The degree of impregnation is evaluated for different process parameters including the hot nitrogen gas temperature, the process speed and the compaction force to provide a process window.

Publisher

SAGE Publications

Link

http://journals.sagepub.com/doi/pdf/10.1177/096369350201100203

Reference7 articles.

1. On-line consolidation mechanisms in thermoplastic filament winding

2. A study on heat transfer during thermoplastic composite tape lay-up process

3. Thermoplastic filament winding—an experimental investigation of the on-line consolidation of poly(ether imide) fit preforms

4. A Model of the Manufacturing Process of Thermoplastic Matrix Composites

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Manufacturing Defects in Thermoplastic Composite Pipes and Their Effect on the in-situ Performance of Thermoplastic Composite Pipes in Oil and Gas Applications;Applied Composite Materials;2022-11-15

2. Effects of fabrication method of composite yarn intermediate material and resin melt viscosity on the impregnation properties and mechanical properties of PA66 fiber and glass fiber composites;Journal of Thermoplastic Composite Materials;2020-10-09

3. Filament winding of aramid/PA6 commingled yarns with in situ consolidation;Journal of Thermoplastic Composite Materials;2017-05-19

4. Filament winding process in thermoplastics;Manufacturing Techniques for Polymer Matrix Composites (PMCs);2012

5. Flow and Heat Transfer Analysis during Tape Layup Process of APC-2 Prepregs;Journal of Thermoplastic Composite Materials;2004-01